1
NATIONAL INSTITUTE OF TECHNOLOGY CALICUT
NIT CAMPUS POST, CALICUT, KERALA - 673 601, INDIA
Information Brochure for Ph.D. Programmes December 2013
GENERAL INFORMATION
ABOUT THE INSTITUTE
National Institute of Technology Calicut (NITC) is one of the premier national institutions for technical
education in India. This was formerly known as Calicut Regional Engineering College. NITC is a technical
institution of national importance set up by an Act of parliament (Act 29 of 2007) namely, the National
Institute of Technology Act 2007, which received the assent of the President of India on 5th June, 2007.
The provisions of the Act have come into force with effect from 15th August, 2007 as per Notification
S.O.1384 (E) dated 9th August, 2007 of the MHRD (Dept. of Higher Education), New Delhi. As per the
provision of the said Act, this Institution runs on non profitable basis. NITC offers academic programmes
leading to B.Tech., B. Arch., M.Tech., MCA, M.Sc(Tech)., MBA and Ph.D. degrees in the appropriate
disciplines. NITC has well-qualified faculty strength of 179 and dedicated support staff of about 228. Apart
from teaching, NITC is engaged in a wide spectrum of activities covering research and development,
industrial consultancy, continuing education and faculty & staff development.
MISSION
To develop high quality technical education and personnel with a sound footing on basic engineering
principles, technical and managerial skills, innovative research capabilities and exemplary professional
conduct to lead and to use technology for the progress of mankind, adapting themselves to the changing
technological environment with the highest ethical values as the inner strength.
VISION
International standing of the highest caliber
LOCATION
Set in a picturesque landscape at the foothills of the Western Ghats, NITC is located about 22 km north-east
of Calicut city in the state of Kerala, India. It stretches over a length of about 1.5 km along the Calicut-
Mukkam road, extending over an area of approximately 120 hectares. The nearest airport is Calicut which is
about 45 km away from the campus.
INFRASTRUCTURE FACILITIES
The Institute has well equipped library, computer centre, seminar halls, lecture hall complexes, various
laboratories in different departments, workshops, hostels for accommodating about 2000 students, health
care centre and adequate facilities for sports, games and co-curricular activities. The Institute has a state-ofthe-
art library consisting of digital library, NALANDA (Network of Automated Library AND Archives)
and a conventional library of books, journals and bound volumes. The main computer centre, which is open
24 hours a day, has all the relevant software packages and latest computers with internet facilities. To
provide service to the campus residents, State Bank of India, Post Office, Canteen & Co-operative Store are
also functioning in the campus.
CO-CURRICULAR ACTIVITIES
Students’ chapter of many professional bodies such as Computer Society of India (CSI), Association of
Computing Machinery (ACM), Indian Society for Technical Education (ISTE), Institute of Electrical &
Electronics Engineers (IEEE) and Institution of Engineers (India) are functioning at NIT Calicut. In
previous years, NITC won the best chapter award for CSI as well as ISTE. The Centre for Value Education
provides students, a unique opportunity to engage in activities that promote human values. Social work is a
part of curriculum. Students get opportunities to take part in cultural and other activities through a number
of clubs such as Literary & Debating Club, Industrial & Planning Forum, Nature Club, etc. operating under
the Students Council. Students annually organise cultural festival Ragam and technical festival Tathva in
which students from all over India participate.
STUDENT SUPPORT SERVICES
The Institute has Training, Placement & Linkage department that looks after the training needs of the
students, their placement of jobs on graduation and for partnership in industry. An Entrepreneurship
2
Development Cell promotes the students for self-employment. A Technology Business Incubator (TBI)
with the assistance from Department of Science and Technology, Government of India is being established.
TBI helps in incubating knowledge based start-ups into sustainable business with single window system.
DISTINGUISHED ALUMNI
A vast majority of the former students have made immense impact in the professional areas such as
academics, administrative services, research laboratories, government and private industries. A strong
network of alumni thrives in India as well as in foreign countries and is known as RECCAA.
ADMISSION TO Ph.D. PROGRAMMES
INTRODUCTION
Facility for doing research leading to Ph.D. degree is available in the following departments /Schools:
Ph.D. PROGRAMMES
Department/School Code
Architecture AR
Biotechnology BT
Chemical Engineering CH
Chemistry CY
Civil Engineering CE
Computer Science and Engineering CS
Electrical Engineering EE
Electronics Engineering EC
Management Studies MS
Mathematics MA
Mechanical Engineering ME
Nanoscience and Technology NS
Physics PH
Admission to the Ph.D. programmes will be in the following schemes: (i) Full-time (FT) (ii) Part-time (PT)
(iii) Internal (IN) and (iv) External (EX).
Ph.D. fellowships are available for candidates under Full-time scheme.
For the Part-time and External schemes of registration, the applicant must be an employee of a recognized
institution/organization with at least two years of service and be engaged in professional work in the area to
which admission is sought.
Candidates under Part-time scheme will have to submit no objection certificate from the Head of the
institution.
External registration is available only for candidates sponsored by and employed in recognized research
institutions such as Research and Development Organizations / National Laboratories/ and Industries
having R & D facilities recognized by Department of Science and Technology. A candidate applying for
admission to the external registration programme must provide detailed information about the research
facilities available at his/her organization and must produce a certificate from a competent authority
specifying that these facilities would be available to him/her for carrying out research. He/She should also
provide the bio-data of the prospective supervisor who would supervise the candidate’s work at his/her
organization. External registration will be granted only when a qualified research guide is available in the
sponsoring institution and is willing to guide the candidate along with a guide in NITC. Candidates from
educational institution are not eligible under external scheme.
3
Registration under Internal (IN) scheme is available only to full time/contract employees of NITC. The
Institute offers Ph.D. programmes under part time scheme for permanent/contract employees and research
staff of the Institute if they apply for the same at the normal time for admission with the recommendation of
the Head of the department in which he/she is employed. Those who are working on research projects in the
Institute should have completed a period of not less than one year on the project and project should be in
force for at least two more years. A certificate to this effect from the Principal Investigator/Head of the
Department concerned should be attached to the application form. If an employee who has registered as a
part time research scholar resigns his/her job before the minimum period required for the PhD work, his/her
registration shall stand automatically cancelled. However, if he/she has completed the course work and
comprehensive examination and the required minimum period, he/she can be allowed to continue the
research work if the Doctoral Committee of the research scholar recommends the same.
ELIGIBILITY & ACADEMIC REQUIREMENTS FOR ADMISSION TO Ph.D. PROGRAMMES
The candidates for Ph.D. Programmes may be offered admission, based on certain minimum academic
requirements to be satisfied by the candidates as given below:
The maximum age for admission to Ph.D. programme is 50 years.
I. Faculty of Engineering:
M.Tech. Degree in Engineering/Technology in the appropriate branch of study with first class or minimum
60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
Candidates shall be required to have passed the four-year regular full time B.E./B.Tech. Degree
in an appropriate branch with minimum 60% marks (CGPA 6.5/10) in aggregate in the qualifying
examination. [For SC/ST candidates 55% marks (CGPA 6.0/10)]. Candidates under lateral entry
should have passed the three year diploma in engineering with minimum 60% marks [For SC/ST
candidates 55% marks (CGPA 6.0/10)].
II. Faculty of Architecture:
Master’s degree in Architecture/Design/Planning/Engineering/Technology or its equivalent with first class
or minimum 60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA
6.0/10)].
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
III. Faculty of Nanoscience & Technology:
M.Tech. Degree in any discipline of Engineering/Technology/Nanoscience & Technology with first class or
minimum 60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
OR
Master’s degree in Chemistry/Physics/Life science/Nanoscience and Technology with first class or
minimum 60 % marks (CGPA 6.5/10) or equivalent, [for SC/ST candidates, the minimum mark is 55%
(CGPA 6.0/10)] and a valid GATE score or UGC/CSIR/NBHM/NET/KSCSTE fellowship in the relevant
area, tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
UGC/CSIR/NBHM/NET/KSCSTE fellowship.
IV. Faculty of Biotechnology:
M.Tech. Degree in Biotechnology/Life Science with first class or minimum 60% marks (CGPA 6.5/10)
[For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
OR
Master’s degree in Life science with first class or minimum 60 % marks (CGPA 6.5/10) or equivalent, [for
SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)] and a valid GATE score or fellowships such
as UGC/CSIR/NBHM/NET/KSCSTE in the relevant area, tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
fellowships such as UGC/CSIR/NBHM/NET/KSCSTE etc.
V. Faculty of Science (Chemistry, Physics and Mathematics):
Master’s degree in Mathematics/Statistics/Chemistry/Physics/Electronics/Computer Science &Applications/
Nano Science & Technology/ Material Science/ Photonics OR M.Tech in relevant disciplines related to the
major areas of research available in the department with first or minimum 60% marks (CGPA 6.5/10) or
4
equivalent, (for SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)] and a valid GATE score or
UGC/CSIR/NBHM/NET/JEST/KSCSTE fellowship in the relevant areas tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
UGC/CSIR/NBHM/NET/JEST/KSCSTE fellowship.
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
VI. Faculty of Management Studies:
Post graduate degree in relevant area with a minimum of first class or equivalent grade from an institution
recognized by UGC/AICTE. [For SC/ST candidates the minimum shall be a second class or equivalent
grade). In addition, the candidates should have a valid UGC/NET/CSIR/JRF fellowship in the relevant
areas tenable from the current year.
Candidates who have master’s degree in engineering and technology with GATE score, OR applying for
internal/external/part-time scheme of registration, OR have managerial experience for not less than five
years do not require UGC/NET/CSIR/JRF fellowship.
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
CANDIDATES HOLDING DEGREES FROM FOREIGN UNIVERSITIES:
Candidates holding degrees from foreign universities have to produce a certificate stating that the
degrees of the candidates have been recognized and approved by the Association of Indian
Universities (AIU)/ Commonwealth Universities/International Association of Universities
(IAU)/Accredited Universities as equivalent to the corresponding Indian degrees for the purpose of
higher studies.
However, applications with degrees from well reputed foreign institutions will be considered
by an expert committee constituted in this regard.
SELECTION OF CANDIDATES
The admission to Ph.D. Programmes will be on the basis of written test and/or interview, by the respective
Department/School.
SALIENT FEATURES OF Ph.D. PROGRAMMES
Ph.D. Programmes of the Institute are structured around certain minimum number of theory courses, which
have to be passed by the scholars, a comprehensive viva-voce examination, a pre-Ph.D. examination and a
Thesis work, which will be examined by a Thesis Board and an Oral Board. Only on the basis of the
successful completion of all the Graduation Requirements, a scholar will be awarded Ph.D. degree by the
Board of Governors of the Institute based on the recommendation of the Senate.
Semester Registration
Every scholar whether working on Full Time or Internal or External or Part-time registration scheme will
have to register every semester till the submission of thesis, by payment of tuition and other fees as
applicable, on the date announced for registration. Generally, registration for Monsoon semester will be in
July/August and Winter semester in December/January.
Course Work and Thesis Work Requirements
Each scholar admitted to Ph.D. programme must necessarily earn a certain minimum number of credits
through course work and research work as given in the table below:
Minimum
qualification at the
time of admission
Minimum
no. of
courses to be
credited
Minimum period for thesis
submission
Maximum period for
thesis submission
Full-time Internal,
External &
Part-time
Fulltime
Internal,
External &
Part-time
M.Tech./ M.Arch. /
M.Plng. 4 30 months/
5 Semesters
36 months/
6 Semesters 5years 7 years
M.Sc./M.A 5 30 months/
5 Semesters
36 months/
6 Semesters 5 years 7 years
5
All research scholars will have to credit all the courses prescribed for study and obtain a minimum letter
grade of C in each subject and must obtain at least an overall CGPA of 7.0. The minimum residential
requirement for External and Part-time Scheme Scholars is one semester.
Monitoring the Work and Progress: Each research scholar will be assigned a Supervisor (Not more than
two) by the Department. The work and progress of the scholars will be monitored by a Doctoral Committee
specially appointed for each scholar. Only with the approval of the Doctoral Committee, the courses of
study shall be prescribed and the Doctoral Thesis approved for submission. The work and progress of the
scholars in each semester will be assessed by the Doctoral Committee and the thesis supervisor and only on
satisfactory progress as approved by the Doctoral Committee, the scholars will be allowed to continue in the
programme.
Eligibility for the Award of Degree: The Ph.D. thesis submitted by the scholar will be evaluated by two
external examiners, one from India and another from abroad, both being experts in the concerned area of the
research. On receipt of satisfactory thesis evaluation reports from both the examiners, an Oral Examination
Board will be constituted by the Chairman Senate for the conduct of the thesis defense /oral examination.
The members of the Board will include one of the external examiners, thesis supervisor(s) and another
examiner appointed by the Chairman of the Senate with the Head of the Department (if he is a guide then
the former Head) as Chairman. The scholar will be declared eligible for the award of the degree only if the
Oral Examination Board recommends the same after successful defense of the thesis and has completed
other requirements as per the Ph.D. regulations.
Graduation Requirements: All Ph.D. scholars irrespective of the type of registration will have to complete
the following requirements for Graduation:
Credited the minimum number of theory courses prescribed and earned the minimum
CGPA stipulated
Successfully completed the Comprehensive Viva-Voce Examination
Presented a Work on Account report and completed the Pre-Ph.D. Examination
Successfully presented an Open Defense of his/her thesis
Obtained positive recommendations both from the external examiners and the Oral
Examination Board
(For more details http://www.nitc.ac.in/app/webroot/img/upload/PhD_Regulations39th_senate.pdf)
FINANCIAL REQUIREMENTS**
(a) Institute Fee
(a) Institute Fee: Fee Category All Open, SC/ST & Sponsored
Candidates
Tuition Fee (per semester) Rs. 17,500
Caution Deposit Rs. 1,000
Examination Fee Rs. 800
Other Fees:
Admission Fee
Library Fee
Development Fee
Students Group
Other Fees
Matriculation & Recognition
Sports Affiliation Fee
Students Welfare
Amenities Fee
Magazine Fee
SJET, PTA, RECCA,
Dept. Assn. & Co-op.Share
Registration Fee
200
1000
1500
600
200
100 Rs. 5,737
300
300
300
75
762
400
*Annual premium for Mediclaim 265
Total amount to be paid at the time of admission: Rs. 25,302/-
* Mediclaim amount may change
6
(b) Hostel Fees - For all categories of candidates:
One Time Fee (Hostel Staff Welfare Fund,
Student Amenities/Welfare Fund, etc.) : Rs. 2,000/-
Caution Deposit : Rs. 11,000/-
Total amount to be paid at the time of admission : Rs. 13,000/-
Hostel room rent and mess charges payable every month extra.
** Financial Requirements are subject to change.
FINANCIAL ASSISTANCE
A few research fellowships are available to full time research scholars who are not receiving any financial
support/ scholarship from other Agencies or State or Central Governments. They are required to assist the
Department in the academic work for at least 8 hours per week as per guidelines issued by the Ministry of
Human Resources and Development, Govt. of India, in addition to satisfying other conditions for the
award /renewal of the fellowship.
The present rates of fellowships are as follows:
Department/ Discipline I & II Years III & IV Year
Ph.D. in Engineering Rs 18,000/ p.m Rs. 20,000/p.m
Ph.D. in Sciences &
Management Studies Rs 16,000/ p.m Rs. 18,000/p.m
This facility will not be available to UGC/CSIR/NBHM/NET/JEST etc. Fellowship holders. However,
those who are awarded UGC/CSIR/NET/NBHM/ JEST etc. can enjoy the Doctoral Fellowships once
admitted to the Ph.D. programme.
MAJOR AREAS OF RESEARCH
ARCHITECTURE
Assessment of Building Performance for Thermal Comfort
Energy efficiency in Buildings
Sustainable Architecture Urban Development
Landscape Design and Interior Design
Urban Design
Architectural Conservation
Conservation of Historic Monuments
Law Cost Housing Materials/Techniques
Earth Architecture & Green Buildings
Traditional Architecture
Standardization of Traditional Construction Materials & Techniques
Masonry Materials & Techniques
Resource Mapping for Local bodies
Watershed Planning
Remote Sensing & GIS Application in Planning
Coastal Zone Planning and Management
Project Management of Buildings
Urban and Regional Development & Planning
Transportation Planning
Environmental Planning and Impact Assessment
Planning Information System Development
Disaster Management
Housing Policies & Management
Community Housing and Settlement Planning
Architectural Design of all Types of Buildings
Management of Building Projects
7
Traditional Building Materials and Construction Techniques
Study of Acoustics and Lighting in Buildings
Costal Area Development Planning
Urban Infrastructure Planning and Impact Assessment
BIOTECHNOLOGY
Gene Regulation
Molecular Genetics
Protein Folding
Protein Engineering
Genetic Engineering
Biomodeling and Drug Design
Plant Molecular Biology
Neurobiology
Immuno –Technology
Bio-separation Techniques
Computational Fluid Dynamics
Enzyme Technology
Cell Biology
Cancer Research
CHEMICAL ENGINEERING
Air and Water Quality Modeling
Bio-separation Techniques
Computational Fluid Dynamics
Effluent Treatment using inverse fluidized Bed Reactor
Heat Transfer
Mass Transfer
Membrane Separations
Micro-fluidics
Modeling and Simulation
Multiphace Flow
Petroleum Engineering
Polymer Technology
Process Control
Renewable Energy
Separation Techniques
Safety Engineering
Wastewater Treatment
Adsorption
Environmental Engineering
Biochemical Engineering
CHEMISTRY
Organic & Bio organic Chemistry
Theoretical and Computational Chemistry
Waste Management & Green Fuel Production
Porphyrin Metal Organic Frameworks (MOFs) and its Catalysis
DNA binding & Cleavage studies using Metalloporphyrins
Surface Chemistry
Soft Materials
Development of Polymer Products
Multiphase Polymer Systems, Nanocomposites and Thermoplastic Elastomers
Biomaterials
Polymer Nano-composites
Transport Process through Membranes
Nanostructured Materials
8
Flourescent Probes for Bio applications
DNA binding Metal Complexes
Cellulose Chemistry
Porphyrins and metalloporphyrins
CIVIL ENGINEERING
Planning (Physical Environment & Infrastructure)
Architectural Design of Buildings
Structural Design and Detailing
Design for Building Services
Foundation Engineering
Environmental Engineering
Traffic and Transportation Planning
Offshore Structures
Wave Hydrodynamics
Water Resources Engineering
Planning and Design of Harbours
Earthquake Engineering
Dynamics of Structures
Rehabilitation of Structures
Computational Structural Mechanics
Construction Project Management
Construction Risk Assessment
COMPUTER SCIENCE & ENGINEERING
Algorithms and Complexity
Bioinformatics
Cloud Computing
Compilers & Programming Languages
Computer Architecture
Database Management Systems
Distributed Computing
Image Processing
Information Security
Middleware
Operating Systems
Software Engineering
ELECTRICAL ENGINEERING
Power & Energy Systems:
Power Quality/FACTS/Custom power devices
Power System Economics, Operation and Control
Power System Stability & Reliability
Protection Systems
Renewable Energy/ Distributed Generations
Smart Grid Engineering
High Voltage Engineering
Nano Technology Application in Power Systems
Electrical Machines & Power Electronics:
BLDC Machines & Applications
Electrical Drives and Control
Industrial Electronics
Switched Mode Power Supplies/ UPS Systems
Control and Signal Processing:
Linear/ Non-linear/ Robust Control Systems
9
Adaptive and Optimal Control
Signals & Systems
System Modeling and Identification
DSP Based Systems & Applications
Bio-signal Processing
Biomedical Applications
Multi-variable Sliding Mode Control and Robotics
Industrial Power & Automation:
Energy Efficiency Auditing & Management
Load Modeling Control & Management
Cogeneration & Industrial Micro Grids
SCADA/Distributed Control System Application
Process Modeling Control & Automation
Industrial Power Optimization
Power Electronic Devices & Converters
ELECTRONICS & COMMUNICATIONS ENGINEERING
Digital Signal Processing
Speech and Audio Processing
Digital Filter Banks
Image and Video Processing
Signal Theory
Multirate Signal Processing
Compressive Sensing
Communications
Communication Networks
Wireless Communications
Wireless Networks
Secure Communications
Computer Communication Networks
OFDM and MIMO systems
VLSI and Micro - Electronics
Multimedia Encryption
Cryptography
Micro Electro Mechanical Systems (MEMS/NEMS)
Nano Electronics
Semi Conductor Devices / Technology
MATHEMATICS
Algebraic graph Theory
Applied Statistics
Computational Fluid Dynamics and Scientific computing
Fractal Geometry
Functional Analysis
Fuzzy Graph Theory and Fuzzy Topology
Graph Theory
Multiset Theory
Numerical Analysis and Scientific Computing
Operator Theory
Optimization Techniques
Stastical Inference
Stochastic Processes
Time Series Analysis
Reliability of Systems
Optimization Problems
Commutative Algebra
10
Operator Algebra
Software Development
MECHANICAL ENGINEERING
Stress Analysis and Vibrations
Production Engineering
Machine Tool Design
Refrigeration and Air Conditioning
Industrial Engineering
System Modelling and Simulation
Materials Management
Plant Design
Group Technology & Cellular Manufacturing
Financial Management
Material Requirements Planning
TQM and ISO 9000
Residual Stresses
Gas and Liquid Chromatography
Thermal Engineering and I. C. Engines
Atmospheric Pollution Control
Renewable Energy Systems
Solar Energy Utilization
CAD/CAM
Robotics
Mechatronics
Metal Casting, Joining and Forming
Powder Metallurgy
Tribology
Bio-Mechanics
Co - ordinate Metrology
Micro - Machining
CNC Machining
Energy Management
Metal Cutting
Computer Aided Inspection
Machining of Composite Materials
Rapid Prototyping
Biomass Utilization
Fuel Cell
MANAGEMENT STUDIES
Business Analysis : Research and Systems
Financial Management
Human Resource Management
Marketing Management
Production and Operations Management
Strategic Management
Humanities and Social Sciences
SCHOOL OF NANO SCIENCE AND TECHNOLOGY
Discrete Computation: Molecular Dynamics
Nanomaterials and their applications
Nanobiotechnology
Nanosensors
Thin films - fabrication and applications
Liquid Crystal Display
11
Polymer Technology
Nano Characterization & Fabrication
Nanofluids
Interferometry
Nonvolitile Memory
Micro Electro Mechanical System (MEMS)
Nano Electro Catalysis
PHYSICS
Unconventional Electronics & Photonics:
Organic, Molecular & Hybrid Electronics
Plastics Solar Cells & LEDs
Polymer Memories & Actuators
Fuel cells & Super Capacitors
Photonic Band Gap Materials
Advanced Materials
Conducting Polymers
Super Conductor/ Polymer Composites
Semi Conducting Glasses & Polymer Nano Composites
Computational Physics: Device modeling & Simulation
Electronic Structure
Low Dimensional Systems
Electron Spin Resonance
Laser and Nonlinear Optics, Nano Photonics
Spectroscopy & Atmospheric optics
Graphene Photonics
Critical point phenomena
Non linear dynamics
Semi conductor nano structures
CENTRE FOR BIO - MECHANICS
Development of External Fixators
Kinematics and Kinetics of Wrist
Joints under Normal and Abnormal Conditions
Correction of Clubfoot Deformities
Study on Visco-elastic Properties of Human Skin
Health Related Physical Fitness Norms
Development of Artificial Limbs for Physically Handicapped patients with Amputations
HOW TO APPLY?
1. Apply online. The instructions for online submission of application are available in the admission
webpage.
2. Before you start filling-in the online application form, keep the following documents ready with you
10th class certificate
Mark list of the under graduate and post graduate degree course and diploma (for lateral entry
candidate)
Demand Draft towards application fee
3. The online application form is best viewed with Internet Explorer 6 or higher. On submission of online
application, a printout of the application has to be taken. To view ‘the application to be printed’, you
require an Adobe Acrobat Reader 6 or higher.
4. Candidates applying for admission to different departments / schools will have to write the corresponding
codes in the appropriate columns in the Application Form. If a candidate is applying for more than one
department/school, submit separate application.
12
5. A passport size photograph taken not earlier than 3 months is to be affixed on the Application Form. The
photo in the application should be self-attested. Additional six copies of the same photograph and one
stamp size photograph should be produced at the time of counselling/admission.
6. Demand Draft towards application fee (Rs. 600/- for Open and OBC candidates, Rs. 300/- for
SC/ST candidates) drawn in favour of “Director NIT Calicut” payable at State Bank of India, NIT
Calicut Branch (Code No. 2207) is to be enclosed.
7. The following documents arranged in the order given below should be enclosed along with the
application (whichever is applicable):
i. Self attested copy of valid GATE score or UGC/CSIR/KSCSTE/NBHM/NET/JEST fellowship in the
relevant areas tenable from the current year, if applicable.
ii. Self attested copy of mark lists & degree certificate of the qualifying examination.
iii. Course completion certificate from the Head of the Institution in the prescribed format and attested
copies of mark lists, in the case of candidates who have appeared or will be appearing in the
qualifying examination. This is also applicable to candidates who have not procured the
provisional/degree certificate.
iv. Self attested copy of Under Graduate Degree certificate and Mark sheets
v. Self attested copy of proof of date of birth
vi. Self attested copy of community certificate in the case of SC/ST candidates from a competent
authority (not below the rank of a Tahsildar).
vii. Self attested copy of community certificate in the case of OBC candidates from a competent authority
(not below the rank of a Tahsildar) indicating the status regarding Creamy Layer for the financial year
ending 31st March 2013.
viii. Self attested copy of experience certificate.
ix. Research Proposal (use separate single sheet, 500 words approximately)
x. Sponsorship certificate duly filled by the sponsoring authority on their letter head with the seal of the
sponsoring authority in the prescribed format, in the case of external candidate.
xi. The following additional documents, are necessary in the case of external candidates: (a) Details
regarding the research facilities available at his/her organization for his/her research work (b)
Certificate from the head of the institute/competent authority stating that these facilities will be made
available to him/her if required for carrying out research and that he/she will be granted leave for
completing the course/residential requirements at NIT Calicut as per Ph.D. regulations of the Institute
(c) Bio-Data of the prospective supervisor who would supervise the candidate’s work at his/her
organization (d) Prospective supervisor’s consent letter.
xii. No objection certificate duly signed by the Head of the institution, in the case of part-time candidate.
(In the case of internal candidates, a No Objection Certificate from the Head of the department).
xiii. Self attested copy of list of AICTE recognized short-term courses attended.
xiv. Self attested copy of all research publications in journals and conferences.
xv. Demand draft towards application fee as per the category of the candidate.
8. Printout of the Application with all the above enclosures should be sent (in A4 size cover) by
Registered Post/ Speed Post so as to reach the Chairperson – PG Admissions, National Institute of
Technology Calicut, NIT Campus PO, Calicut - 673 601, Kerala on or before 11-11-2013.
9. The status regarding receipt of application with demand draft & other documents at NIT Calicut
and eligibility for test/ interview will be available in our website in due course.
No separate call letter for test/ interview will be dispatched.
13
IMPORTANT DATES (Tentative)
Events Dates
Availability of Online Application in website 18th October 2013
Last Date for Receipt of Completed Applications 11th November 2013
Test / Interview 25th November 2013
Date of Admission and Reporting for the Programme* 11th December 2013
Registration 17th December 2013
Orientation 17th December 2013
Commencement of Classes 18th December 2013
* The candidate is to be present in the department from the date of reporting onwards.
LEGAL JURISDICTION
All disputes pertaining to the counselling and admission for the Ph.D. programme of NIT Calicut shall fall
within the jurisdiction of Calicut, Kerala only.
DISCLAIMER
The statement made in the information brochure and all other information contained herein is believed to be
correct at the time of publication. However, the Institute reserves the right to make at any time without
notice, changes in and additions to the regulations, conditions governing the admission, requirements, seats,
fees and any other information, or statements contained in this information brochure. No responsibility will
be accepted by the Institute/Chairperson-Admissions for hardship or expenses encountered by its
students/any other person for such changes, additions, omissions or errors, no matter how they are caused.
Address for Correspondence
Chairman – P.G. Admissions
National Institute of Technology Calicut
NIT Campus P.O. Calicut 673 601
Kerala, India
Telephone: 0495 2286119
E-mail: pgadmissions@nitc.ac.in
Website: http://www.nitc.ac.in/index.php/?url=admission/index/35
NATIONAL INSTITUTE OF TECHNOLOGY CALICUT
NIT CAMPUS POST, CALICUT, KERALA - 673 601, INDIA
Information Brochure for Ph.D. Programmes December 2013
GENERAL INFORMATION
ABOUT THE INSTITUTE
National Institute of Technology Calicut (NITC) is one of the premier national institutions for technical
education in India. This was formerly known as Calicut Regional Engineering College. NITC is a technical
institution of national importance set up by an Act of parliament (Act 29 of 2007) namely, the National
Institute of Technology Act 2007, which received the assent of the President of India on 5th June, 2007.
The provisions of the Act have come into force with effect from 15th August, 2007 as per Notification
S.O.1384 (E) dated 9th August, 2007 of the MHRD (Dept. of Higher Education), New Delhi. As per the
provision of the said Act, this Institution runs on non profitable basis. NITC offers academic programmes
leading to B.Tech., B. Arch., M.Tech., MCA, M.Sc(Tech)., MBA and Ph.D. degrees in the appropriate
disciplines. NITC has well-qualified faculty strength of 179 and dedicated support staff of about 228. Apart
from teaching, NITC is engaged in a wide spectrum of activities covering research and development,
industrial consultancy, continuing education and faculty & staff development.
MISSION
To develop high quality technical education and personnel with a sound footing on basic engineering
principles, technical and managerial skills, innovative research capabilities and exemplary professional
conduct to lead and to use technology for the progress of mankind, adapting themselves to the changing
technological environment with the highest ethical values as the inner strength.
VISION
International standing of the highest caliber
LOCATION
Set in a picturesque landscape at the foothills of the Western Ghats, NITC is located about 22 km north-east
of Calicut city in the state of Kerala, India. It stretches over a length of about 1.5 km along the Calicut-
Mukkam road, extending over an area of approximately 120 hectares. The nearest airport is Calicut which is
about 45 km away from the campus.
INFRASTRUCTURE FACILITIES
The Institute has well equipped library, computer centre, seminar halls, lecture hall complexes, various
laboratories in different departments, workshops, hostels for accommodating about 2000 students, health
care centre and adequate facilities for sports, games and co-curricular activities. The Institute has a state-ofthe-
art library consisting of digital library, NALANDA (Network of Automated Library AND Archives)
and a conventional library of books, journals and bound volumes. The main computer centre, which is open
24 hours a day, has all the relevant software packages and latest computers with internet facilities. To
provide service to the campus residents, State Bank of India, Post Office, Canteen & Co-operative Store are
also functioning in the campus.
CO-CURRICULAR ACTIVITIES
Students’ chapter of many professional bodies such as Computer Society of India (CSI), Association of
Computing Machinery (ACM), Indian Society for Technical Education (ISTE), Institute of Electrical &
Electronics Engineers (IEEE) and Institution of Engineers (India) are functioning at NIT Calicut. In
previous years, NITC won the best chapter award for CSI as well as ISTE. The Centre for Value Education
provides students, a unique opportunity to engage in activities that promote human values. Social work is a
part of curriculum. Students get opportunities to take part in cultural and other activities through a number
of clubs such as Literary & Debating Club, Industrial & Planning Forum, Nature Club, etc. operating under
the Students Council. Students annually organise cultural festival Ragam and technical festival Tathva in
which students from all over India participate.
STUDENT SUPPORT SERVICES
The Institute has Training, Placement & Linkage department that looks after the training needs of the
students, their placement of jobs on graduation and for partnership in industry. An Entrepreneurship
2
Development Cell promotes the students for self-employment. A Technology Business Incubator (TBI)
with the assistance from Department of Science and Technology, Government of India is being established.
TBI helps in incubating knowledge based start-ups into sustainable business with single window system.
DISTINGUISHED ALUMNI
A vast majority of the former students have made immense impact in the professional areas such as
academics, administrative services, research laboratories, government and private industries. A strong
network of alumni thrives in India as well as in foreign countries and is known as RECCAA.
ADMISSION TO Ph.D. PROGRAMMES
INTRODUCTION
Facility for doing research leading to Ph.D. degree is available in the following departments /Schools:
Ph.D. PROGRAMMES
Department/School Code
Architecture AR
Biotechnology BT
Chemical Engineering CH
Chemistry CY
Civil Engineering CE
Computer Science and Engineering CS
Electrical Engineering EE
Electronics Engineering EC
Management Studies MS
Mathematics MA
Mechanical Engineering ME
Nanoscience and Technology NS
Physics PH
Admission to the Ph.D. programmes will be in the following schemes: (i) Full-time (FT) (ii) Part-time (PT)
(iii) Internal (IN) and (iv) External (EX).
Ph.D. fellowships are available for candidates under Full-time scheme.
For the Part-time and External schemes of registration, the applicant must be an employee of a recognized
institution/organization with at least two years of service and be engaged in professional work in the area to
which admission is sought.
Candidates under Part-time scheme will have to submit no objection certificate from the Head of the
institution.
External registration is available only for candidates sponsored by and employed in recognized research
institutions such as Research and Development Organizations / National Laboratories/ and Industries
having R & D facilities recognized by Department of Science and Technology. A candidate applying for
admission to the external registration programme must provide detailed information about the research
facilities available at his/her organization and must produce a certificate from a competent authority
specifying that these facilities would be available to him/her for carrying out research. He/She should also
provide the bio-data of the prospective supervisor who would supervise the candidate’s work at his/her
organization. External registration will be granted only when a qualified research guide is available in the
sponsoring institution and is willing to guide the candidate along with a guide in NITC. Candidates from
educational institution are not eligible under external scheme.
3
Registration under Internal (IN) scheme is available only to full time/contract employees of NITC. The
Institute offers Ph.D. programmes under part time scheme for permanent/contract employees and research
staff of the Institute if they apply for the same at the normal time for admission with the recommendation of
the Head of the department in which he/she is employed. Those who are working on research projects in the
Institute should have completed a period of not less than one year on the project and project should be in
force for at least two more years. A certificate to this effect from the Principal Investigator/Head of the
Department concerned should be attached to the application form. If an employee who has registered as a
part time research scholar resigns his/her job before the minimum period required for the PhD work, his/her
registration shall stand automatically cancelled. However, if he/she has completed the course work and
comprehensive examination and the required minimum period, he/she can be allowed to continue the
research work if the Doctoral Committee of the research scholar recommends the same.
ELIGIBILITY & ACADEMIC REQUIREMENTS FOR ADMISSION TO Ph.D. PROGRAMMES
The candidates for Ph.D. Programmes may be offered admission, based on certain minimum academic
requirements to be satisfied by the candidates as given below:
The maximum age for admission to Ph.D. programme is 50 years.
I. Faculty of Engineering:
M.Tech. Degree in Engineering/Technology in the appropriate branch of study with first class or minimum
60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
Candidates shall be required to have passed the four-year regular full time B.E./B.Tech. Degree
in an appropriate branch with minimum 60% marks (CGPA 6.5/10) in aggregate in the qualifying
examination. [For SC/ST candidates 55% marks (CGPA 6.0/10)]. Candidates under lateral entry
should have passed the three year diploma in engineering with minimum 60% marks [For SC/ST
candidates 55% marks (CGPA 6.0/10)].
II. Faculty of Architecture:
Master’s degree in Architecture/Design/Planning/Engineering/Technology or its equivalent with first class
or minimum 60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA
6.0/10)].
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
III. Faculty of Nanoscience & Technology:
M.Tech. Degree in any discipline of Engineering/Technology/Nanoscience & Technology with first class or
minimum 60% marks (CGPA 6.5/10) [For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
OR
Master’s degree in Chemistry/Physics/Life science/Nanoscience and Technology with first class or
minimum 60 % marks (CGPA 6.5/10) or equivalent, [for SC/ST candidates, the minimum mark is 55%
(CGPA 6.0/10)] and a valid GATE score or UGC/CSIR/NBHM/NET/KSCSTE fellowship in the relevant
area, tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
UGC/CSIR/NBHM/NET/KSCSTE fellowship.
IV. Faculty of Biotechnology:
M.Tech. Degree in Biotechnology/Life Science with first class or minimum 60% marks (CGPA 6.5/10)
[For SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)].
OR
Master’s degree in Life science with first class or minimum 60 % marks (CGPA 6.5/10) or equivalent, [for
SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)] and a valid GATE score or fellowships such
as UGC/CSIR/NBHM/NET/KSCSTE in the relevant area, tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
fellowships such as UGC/CSIR/NBHM/NET/KSCSTE etc.
V. Faculty of Science (Chemistry, Physics and Mathematics):
Master’s degree in Mathematics/Statistics/Chemistry/Physics/Electronics/Computer Science &Applications/
Nano Science & Technology/ Material Science/ Photonics OR M.Tech in relevant disciplines related to the
major areas of research available in the department with first or minimum 60% marks (CGPA 6.5/10) or
4
equivalent, (for SC/ST candidates, the minimum mark is 55% (CGPA 6.0/10)] and a valid GATE score or
UGC/CSIR/NBHM/NET/JEST/KSCSTE fellowship in the relevant areas tenable from the current year.
Candidates applying for External and Part-time scheme of registration do not require GATE score or
UGC/CSIR/NBHM/NET/JEST/KSCSTE fellowship.
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
VI. Faculty of Management Studies:
Post graduate degree in relevant area with a minimum of first class or equivalent grade from an institution
recognized by UGC/AICTE. [For SC/ST candidates the minimum shall be a second class or equivalent
grade). In addition, the candidates should have a valid UGC/NET/CSIR/JRF fellowship in the relevant
areas tenable from the current year.
Candidates who have master’s degree in engineering and technology with GATE score, OR applying for
internal/external/part-time scheme of registration, OR have managerial experience for not less than five
years do not require UGC/NET/CSIR/JRF fellowship.
Candidates should possess First Class (60%) or equivalent both in Bachelors and Masters degrees. For
SC/ST candidates 55% (CGPA 6.0/10) or equivalent both in Bachelors and Masters degrees.
CANDIDATES HOLDING DEGREES FROM FOREIGN UNIVERSITIES:
Candidates holding degrees from foreign universities have to produce a certificate stating that the
degrees of the candidates have been recognized and approved by the Association of Indian
Universities (AIU)/ Commonwealth Universities/International Association of Universities
(IAU)/Accredited Universities as equivalent to the corresponding Indian degrees for the purpose of
higher studies.
However, applications with degrees from well reputed foreign institutions will be considered
by an expert committee constituted in this regard.
SELECTION OF CANDIDATES
The admission to Ph.D. Programmes will be on the basis of written test and/or interview, by the respective
Department/School.
SALIENT FEATURES OF Ph.D. PROGRAMMES
Ph.D. Programmes of the Institute are structured around certain minimum number of theory courses, which
have to be passed by the scholars, a comprehensive viva-voce examination, a pre-Ph.D. examination and a
Thesis work, which will be examined by a Thesis Board and an Oral Board. Only on the basis of the
successful completion of all the Graduation Requirements, a scholar will be awarded Ph.D. degree by the
Board of Governors of the Institute based on the recommendation of the Senate.
Semester Registration
Every scholar whether working on Full Time or Internal or External or Part-time registration scheme will
have to register every semester till the submission of thesis, by payment of tuition and other fees as
applicable, on the date announced for registration. Generally, registration for Monsoon semester will be in
July/August and Winter semester in December/January.
Course Work and Thesis Work Requirements
Each scholar admitted to Ph.D. programme must necessarily earn a certain minimum number of credits
through course work and research work as given in the table below:
Minimum
qualification at the
time of admission
Minimum
no. of
courses to be
credited
Minimum period for thesis
submission
Maximum period for
thesis submission
Full-time Internal,
External &
Part-time
Fulltime
Internal,
External &
Part-time
M.Tech./ M.Arch. /
M.Plng. 4 30 months/
5 Semesters
36 months/
6 Semesters 5years 7 years
M.Sc./M.A 5 30 months/
5 Semesters
36 months/
6 Semesters 5 years 7 years
5
All research scholars will have to credit all the courses prescribed for study and obtain a minimum letter
grade of C in each subject and must obtain at least an overall CGPA of 7.0. The minimum residential
requirement for External and Part-time Scheme Scholars is one semester.
Monitoring the Work and Progress: Each research scholar will be assigned a Supervisor (Not more than
two) by the Department. The work and progress of the scholars will be monitored by a Doctoral Committee
specially appointed for each scholar. Only with the approval of the Doctoral Committee, the courses of
study shall be prescribed and the Doctoral Thesis approved for submission. The work and progress of the
scholars in each semester will be assessed by the Doctoral Committee and the thesis supervisor and only on
satisfactory progress as approved by the Doctoral Committee, the scholars will be allowed to continue in the
programme.
Eligibility for the Award of Degree: The Ph.D. thesis submitted by the scholar will be evaluated by two
external examiners, one from India and another from abroad, both being experts in the concerned area of the
research. On receipt of satisfactory thesis evaluation reports from both the examiners, an Oral Examination
Board will be constituted by the Chairman Senate for the conduct of the thesis defense /oral examination.
The members of the Board will include one of the external examiners, thesis supervisor(s) and another
examiner appointed by the Chairman of the Senate with the Head of the Department (if he is a guide then
the former Head) as Chairman. The scholar will be declared eligible for the award of the degree only if the
Oral Examination Board recommends the same after successful defense of the thesis and has completed
other requirements as per the Ph.D. regulations.
Graduation Requirements: All Ph.D. scholars irrespective of the type of registration will have to complete
the following requirements for Graduation:
Credited the minimum number of theory courses prescribed and earned the minimum
CGPA stipulated
Successfully completed the Comprehensive Viva-Voce Examination
Presented a Work on Account report and completed the Pre-Ph.D. Examination
Successfully presented an Open Defense of his/her thesis
Obtained positive recommendations both from the external examiners and the Oral
Examination Board
(For more details http://www.nitc.ac.in/app/webroot/img/upload/PhD_Regulations39th_senate.pdf)
FINANCIAL REQUIREMENTS**
(a) Institute Fee
(a) Institute Fee: Fee Category All Open, SC/ST & Sponsored
Candidates
Tuition Fee (per semester) Rs. 17,500
Caution Deposit Rs. 1,000
Examination Fee Rs. 800
Other Fees:
Admission Fee
Library Fee
Development Fee
Students Group
Other Fees
Matriculation & Recognition
Sports Affiliation Fee
Students Welfare
Amenities Fee
Magazine Fee
SJET, PTA, RECCA,
Dept. Assn. & Co-op.Share
Registration Fee
200
1000
1500
600
200
100 Rs. 5,737
300
300
300
75
762
400
*Annual premium for Mediclaim 265
Total amount to be paid at the time of admission: Rs. 25,302/-
* Mediclaim amount may change
6
(b) Hostel Fees - For all categories of candidates:
One Time Fee (Hostel Staff Welfare Fund,
Student Amenities/Welfare Fund, etc.) : Rs. 2,000/-
Caution Deposit : Rs. 11,000/-
Total amount to be paid at the time of admission : Rs. 13,000/-
Hostel room rent and mess charges payable every month extra.
** Financial Requirements are subject to change.
FINANCIAL ASSISTANCE
A few research fellowships are available to full time research scholars who are not receiving any financial
support/ scholarship from other Agencies or State or Central Governments. They are required to assist the
Department in the academic work for at least 8 hours per week as per guidelines issued by the Ministry of
Human Resources and Development, Govt. of India, in addition to satisfying other conditions for the
award /renewal of the fellowship.
The present rates of fellowships are as follows:
Department/ Discipline I & II Years III & IV Year
Ph.D. in Engineering Rs 18,000/ p.m Rs. 20,000/p.m
Ph.D. in Sciences &
Management Studies Rs 16,000/ p.m Rs. 18,000/p.m
This facility will not be available to UGC/CSIR/NBHM/NET/JEST etc. Fellowship holders. However,
those who are awarded UGC/CSIR/NET/NBHM/ JEST etc. can enjoy the Doctoral Fellowships once
admitted to the Ph.D. programme.
MAJOR AREAS OF RESEARCH
ARCHITECTURE
Assessment of Building Performance for Thermal Comfort
Energy efficiency in Buildings
Sustainable Architecture Urban Development
Landscape Design and Interior Design
Urban Design
Architectural Conservation
Conservation of Historic Monuments
Law Cost Housing Materials/Techniques
Earth Architecture & Green Buildings
Traditional Architecture
Standardization of Traditional Construction Materials & Techniques
Masonry Materials & Techniques
Resource Mapping for Local bodies
Watershed Planning
Remote Sensing & GIS Application in Planning
Coastal Zone Planning and Management
Project Management of Buildings
Urban and Regional Development & Planning
Transportation Planning
Environmental Planning and Impact Assessment
Planning Information System Development
Disaster Management
Housing Policies & Management
Community Housing and Settlement Planning
Architectural Design of all Types of Buildings
Management of Building Projects
7
Traditional Building Materials and Construction Techniques
Study of Acoustics and Lighting in Buildings
Costal Area Development Planning
Urban Infrastructure Planning and Impact Assessment
BIOTECHNOLOGY
Gene Regulation
Molecular Genetics
Protein Folding
Protein Engineering
Genetic Engineering
Biomodeling and Drug Design
Plant Molecular Biology
Neurobiology
Immuno –Technology
Bio-separation Techniques
Computational Fluid Dynamics
Enzyme Technology
Cell Biology
Cancer Research
CHEMICAL ENGINEERING
Air and Water Quality Modeling
Bio-separation Techniques
Computational Fluid Dynamics
Effluent Treatment using inverse fluidized Bed Reactor
Heat Transfer
Mass Transfer
Membrane Separations
Micro-fluidics
Modeling and Simulation
Multiphace Flow
Petroleum Engineering
Polymer Technology
Process Control
Renewable Energy
Separation Techniques
Safety Engineering
Wastewater Treatment
Adsorption
Environmental Engineering
Biochemical Engineering
CHEMISTRY
Organic & Bio organic Chemistry
Theoretical and Computational Chemistry
Waste Management & Green Fuel Production
Porphyrin Metal Organic Frameworks (MOFs) and its Catalysis
DNA binding & Cleavage studies using Metalloporphyrins
Surface Chemistry
Soft Materials
Development of Polymer Products
Multiphase Polymer Systems, Nanocomposites and Thermoplastic Elastomers
Biomaterials
Polymer Nano-composites
Transport Process through Membranes
Nanostructured Materials
8
Flourescent Probes for Bio applications
DNA binding Metal Complexes
Cellulose Chemistry
Porphyrins and metalloporphyrins
CIVIL ENGINEERING
Planning (Physical Environment & Infrastructure)
Architectural Design of Buildings
Structural Design and Detailing
Design for Building Services
Foundation Engineering
Environmental Engineering
Traffic and Transportation Planning
Offshore Structures
Wave Hydrodynamics
Water Resources Engineering
Planning and Design of Harbours
Earthquake Engineering
Dynamics of Structures
Rehabilitation of Structures
Computational Structural Mechanics
Construction Project Management
Construction Risk Assessment
COMPUTER SCIENCE & ENGINEERING
Algorithms and Complexity
Bioinformatics
Cloud Computing
Compilers & Programming Languages
Computer Architecture
Database Management Systems
Distributed Computing
Image Processing
Information Security
Middleware
Operating Systems
Software Engineering
ELECTRICAL ENGINEERING
Power & Energy Systems:
Power Quality/FACTS/Custom power devices
Power System Economics, Operation and Control
Power System Stability & Reliability
Protection Systems
Renewable Energy/ Distributed Generations
Smart Grid Engineering
High Voltage Engineering
Nano Technology Application in Power Systems
Electrical Machines & Power Electronics:
BLDC Machines & Applications
Electrical Drives and Control
Industrial Electronics
Switched Mode Power Supplies/ UPS Systems
Control and Signal Processing:
Linear/ Non-linear/ Robust Control Systems
9
Adaptive and Optimal Control
Signals & Systems
System Modeling and Identification
DSP Based Systems & Applications
Bio-signal Processing
Biomedical Applications
Multi-variable Sliding Mode Control and Robotics
Industrial Power & Automation:
Energy Efficiency Auditing & Management
Load Modeling Control & Management
Cogeneration & Industrial Micro Grids
SCADA/Distributed Control System Application
Process Modeling Control & Automation
Industrial Power Optimization
Power Electronic Devices & Converters
ELECTRONICS & COMMUNICATIONS ENGINEERING
Digital Signal Processing
Speech and Audio Processing
Digital Filter Banks
Image and Video Processing
Signal Theory
Multirate Signal Processing
Compressive Sensing
Communications
Communication Networks
Wireless Communications
Wireless Networks
Secure Communications
Computer Communication Networks
OFDM and MIMO systems
VLSI and Micro - Electronics
Multimedia Encryption
Cryptography
Micro Electro Mechanical Systems (MEMS/NEMS)
Nano Electronics
Semi Conductor Devices / Technology
MATHEMATICS
Algebraic graph Theory
Applied Statistics
Computational Fluid Dynamics and Scientific computing
Fractal Geometry
Functional Analysis
Fuzzy Graph Theory and Fuzzy Topology
Graph Theory
Multiset Theory
Numerical Analysis and Scientific Computing
Operator Theory
Optimization Techniques
Stastical Inference
Stochastic Processes
Time Series Analysis
Reliability of Systems
Optimization Problems
Commutative Algebra
10
Operator Algebra
Software Development
MECHANICAL ENGINEERING
Stress Analysis and Vibrations
Production Engineering
Machine Tool Design
Refrigeration and Air Conditioning
Industrial Engineering
System Modelling and Simulation
Materials Management
Plant Design
Group Technology & Cellular Manufacturing
Financial Management
Material Requirements Planning
TQM and ISO 9000
Residual Stresses
Gas and Liquid Chromatography
Thermal Engineering and I. C. Engines
Atmospheric Pollution Control
Renewable Energy Systems
Solar Energy Utilization
CAD/CAM
Robotics
Mechatronics
Metal Casting, Joining and Forming
Powder Metallurgy
Tribology
Bio-Mechanics
Co - ordinate Metrology
Micro - Machining
CNC Machining
Energy Management
Metal Cutting
Computer Aided Inspection
Machining of Composite Materials
Rapid Prototyping
Biomass Utilization
Fuel Cell
MANAGEMENT STUDIES
Business Analysis : Research and Systems
Financial Management
Human Resource Management
Marketing Management
Production and Operations Management
Strategic Management
Humanities and Social Sciences
SCHOOL OF NANO SCIENCE AND TECHNOLOGY
Discrete Computation: Molecular Dynamics
Nanomaterials and their applications
Nanobiotechnology
Nanosensors
Thin films - fabrication and applications
Liquid Crystal Display
11
Polymer Technology
Nano Characterization & Fabrication
Nanofluids
Interferometry
Nonvolitile Memory
Micro Electro Mechanical System (MEMS)
Nano Electro Catalysis
PHYSICS
Unconventional Electronics & Photonics:
Organic, Molecular & Hybrid Electronics
Plastics Solar Cells & LEDs
Polymer Memories & Actuators
Fuel cells & Super Capacitors
Photonic Band Gap Materials
Advanced Materials
Conducting Polymers
Super Conductor/ Polymer Composites
Semi Conducting Glasses & Polymer Nano Composites
Computational Physics: Device modeling & Simulation
Electronic Structure
Low Dimensional Systems
Electron Spin Resonance
Laser and Nonlinear Optics, Nano Photonics
Spectroscopy & Atmospheric optics
Graphene Photonics
Critical point phenomena
Non linear dynamics
Semi conductor nano structures
CENTRE FOR BIO - MECHANICS
Development of External Fixators
Kinematics and Kinetics of Wrist
Joints under Normal and Abnormal Conditions
Correction of Clubfoot Deformities
Study on Visco-elastic Properties of Human Skin
Health Related Physical Fitness Norms
Development of Artificial Limbs for Physically Handicapped patients with Amputations
HOW TO APPLY?
1. Apply online. The instructions for online submission of application are available in the admission
webpage.
2. Before you start filling-in the online application form, keep the following documents ready with you
10th class certificate
Mark list of the under graduate and post graduate degree course and diploma (for lateral entry
candidate)
Demand Draft towards application fee
3. The online application form is best viewed with Internet Explorer 6 or higher. On submission of online
application, a printout of the application has to be taken. To view ‘the application to be printed’, you
require an Adobe Acrobat Reader 6 or higher.
4. Candidates applying for admission to different departments / schools will have to write the corresponding
codes in the appropriate columns in the Application Form. If a candidate is applying for more than one
department/school, submit separate application.
12
5. A passport size photograph taken not earlier than 3 months is to be affixed on the Application Form. The
photo in the application should be self-attested. Additional six copies of the same photograph and one
stamp size photograph should be produced at the time of counselling/admission.
6. Demand Draft towards application fee (Rs. 600/- for Open and OBC candidates, Rs. 300/- for
SC/ST candidates) drawn in favour of “Director NIT Calicut” payable at State Bank of India, NIT
Calicut Branch (Code No. 2207) is to be enclosed.
7. The following documents arranged in the order given below should be enclosed along with the
application (whichever is applicable):
i. Self attested copy of valid GATE score or UGC/CSIR/KSCSTE/NBHM/NET/JEST fellowship in the
relevant areas tenable from the current year, if applicable.
ii. Self attested copy of mark lists & degree certificate of the qualifying examination.
iii. Course completion certificate from the Head of the Institution in the prescribed format and attested
copies of mark lists, in the case of candidates who have appeared or will be appearing in the
qualifying examination. This is also applicable to candidates who have not procured the
provisional/degree certificate.
iv. Self attested copy of Under Graduate Degree certificate and Mark sheets
v. Self attested copy of proof of date of birth
vi. Self attested copy of community certificate in the case of SC/ST candidates from a competent
authority (not below the rank of a Tahsildar).
vii. Self attested copy of community certificate in the case of OBC candidates from a competent authority
(not below the rank of a Tahsildar) indicating the status regarding Creamy Layer for the financial year
ending 31st March 2013.
viii. Self attested copy of experience certificate.
ix. Research Proposal (use separate single sheet, 500 words approximately)
x. Sponsorship certificate duly filled by the sponsoring authority on their letter head with the seal of the
sponsoring authority in the prescribed format, in the case of external candidate.
xi. The following additional documents, are necessary in the case of external candidates: (a) Details
regarding the research facilities available at his/her organization for his/her research work (b)
Certificate from the head of the institute/competent authority stating that these facilities will be made
available to him/her if required for carrying out research and that he/she will be granted leave for
completing the course/residential requirements at NIT Calicut as per Ph.D. regulations of the Institute
(c) Bio-Data of the prospective supervisor who would supervise the candidate’s work at his/her
organization (d) Prospective supervisor’s consent letter.
xii. No objection certificate duly signed by the Head of the institution, in the case of part-time candidate.
(In the case of internal candidates, a No Objection Certificate from the Head of the department).
xiii. Self attested copy of list of AICTE recognized short-term courses attended.
xiv. Self attested copy of all research publications in journals and conferences.
xv. Demand draft towards application fee as per the category of the candidate.
8. Printout of the Application with all the above enclosures should be sent (in A4 size cover) by
Registered Post/ Speed Post so as to reach the Chairperson – PG Admissions, National Institute of
Technology Calicut, NIT Campus PO, Calicut - 673 601, Kerala on or before 11-11-2013.
9. The status regarding receipt of application with demand draft & other documents at NIT Calicut
and eligibility for test/ interview will be available in our website in due course.
No separate call letter for test/ interview will be dispatched.
13
IMPORTANT DATES (Tentative)
Events Dates
Availability of Online Application in website 18th October 2013
Last Date for Receipt of Completed Applications 11th November 2013
Test / Interview 25th November 2013
Date of Admission and Reporting for the Programme* 11th December 2013
Registration 17th December 2013
Orientation 17th December 2013
Commencement of Classes 18th December 2013
* The candidate is to be present in the department from the date of reporting onwards.
LEGAL JURISDICTION
All disputes pertaining to the counselling and admission for the Ph.D. programme of NIT Calicut shall fall
within the jurisdiction of Calicut, Kerala only.
DISCLAIMER
The statement made in the information brochure and all other information contained herein is believed to be
correct at the time of publication. However, the Institute reserves the right to make at any time without
notice, changes in and additions to the regulations, conditions governing the admission, requirements, seats,
fees and any other information, or statements contained in this information brochure. No responsibility will
be accepted by the Institute/Chairperson-Admissions for hardship or expenses encountered by its
students/any other person for such changes, additions, omissions or errors, no matter how they are caused.
Address for Correspondence
Chairman – P.G. Admissions
National Institute of Technology Calicut
NIT Campus P.O. Calicut 673 601
Kerala, India
Telephone: 0495 2286119
E-mail: pgadmissions@nitc.ac.in
Website: http://www.nitc.ac.in/index.php/?url=admission/index/35
No comments:
Post a Comment